PT-PSE101G-AT is a single port PoE Injector. It provides 55Vdc, 0.55A power for remote PDs over 2-pairs output. It supports both 10/100 Base-T and Gigabit device. It works for 30W PoE PDs, such as wireless APs, Network cameras,IP Phones and other high power Ethernet terminals.It fully complies to IEEE802.3af/at PoE standard.

PT-PSE101G-AT is designed for indoor use. It works with input voltage of 100-240Vac. It has detection chip inside, which will detect and classify PD before powering it. It will not apply power until a standard-compliant PD is detected. The effective distance is 100 meters over Cat5e/Cat6 cables.

- Input :100-240Vac 1.0A 50/60Hz
- Output: 55Vdc 550mA
- Power Pins: 4/5(+), 7/8(-)
- Data Speed: 10/100/1000Mbps
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
- Full compliant with IEEE802.3af/at
- RoHS Compliance
- WEEE Compliance
- Operating Temperature: 0℃ to 40℃
- Operating Humidity: 20% to 80%, non-condensation
- Storage Temperature: -20℃ to 70℃
- Storage Humidity: 10% to 90%, non-condensation
- Operating Altitude: up to 2000meters
- Case: Plastic
- Color: Black
- Mounting: Wall-mounted
- IP Rated: IP40
- Size: 140mm X 63mm X 33mm
- Weight: 205g
- Packing.：0.8 meters power cord with US plug x 1, Manual x 1
- Full details and data sheet at: http://www.poesystem.com/single-port1/PT-PSE101G-AT-PoE-Injector.html