【LOW POWER CONSUMPTION AND GREAT STABILITY】: Here are the specs for the car kill switch: Rated current: 240 amps; Rated voltage: 12 volts; Standby power consumption: 3 milliamps; Power failure threshold: 11.6V - 12V; Instantaneous current: 500 amps. Operating Temperature of the battery kill switch: -22°F - 194°F.
【SMART VOLTAGE SAFETY KILL SWITCH】: For this car kill switch, when the voltage drops below 11.8V, it will automatically cut off power after 120 seconds to save power. When the voltage is higher than 13.2V, the remote control becomes invalid and can only be controlled by a manual switch to prevent accidental power cuts during travel. This car kill switch uses a new type of relay that controls circuit disconnection and cutoff using the magnetic principle, and with a standby current of 3mA
【PROTECT AND EXTEND BATTERY LIFE】: This car kill switch can prevent car battery depletion due to long-term parking, line aging, forgetting to turn off lights, and other reasons. This remote battery protector can maximize the retention of car battery power, effectively protecting and extending the life of the car battery.
【WHAT YOU GET】: You'll receive 1 cut off switch, 2 remote controllers, 1 manual, 1 nut, 1 gold spacer, 2 silver spacers, and 1 cushioning sheet. This car kill switch uses the negative link method, is easy to install, and has more stable performance. Just follow the included instructions for installation. NOTE: Be sure to turn off the power before installation and do an ignition test after installation.
【APPLICATION AND PRECAUTIONS】: This kill switch is suitable for most 12V cars, boats, RVs, trailers, trucks, ATVs, UTVs, motorcycles, and vehicles with displacements less than 4.0. Negative pole sizes: 9 - 13 mm and 15 - 17 mm. Not suitable for small pile head vehicles. Note: The size of the switch is 3.3" x 2.4" x 1.4". Before ordering, it's best to check and measure your car's battery compartment to see if there's enough space to install it and close the hood properly.