1. Small car sticker installation method (dry sticker method) : 1. Clean the body and keep it dry. 2, determine the position of the need to paste. Under normal circumstances, slowly side paste, side scraping tools, side uncover the paper. 3, if the graph is really not big, you can also tear off all the stickers and paste them again, but be careful not to accidentally stick. 4. After pasting, repeatedly scrape and press several times. Remove the transparent transfer membrane. 5, in the door and seam with a box cutter knife, to the inner bag. 6. Do not let the sticker and the body have any separation or protrusion. Two. Large sticker installation method (wet sticker method) : tools: rags, sprinklers, scrapers or credit cards 1. Clean the body and sprinkle water evenly on the parts of the body to be pasted to reduce the viscosity of the sticker and facilitate the adjustment of the position. 2, determine the position of the need to paste. Slowly pasted side, side gently scraping tools, side uncovered paper. 3, meet door handle or anti-friction strip according to the situation to cut the material and package. 4, appropriate adjustment, the general position of the figure to determine the correct, forcibly repeatedly scraping water and bubbles. 5, in the door and seam with a box cutter knife, to the inner bag. 6. Do not let the sticker and the body have any separation or protrusion. 7, try to let the moisture in the sticker dry, if conditions can be moderate heating drying. Depending on the weather, wash your car in a day or two.