Fitment:
For BMW N14, N18, N54 and N63 engine
For BMW 335i, 335xi, X5 3.0L 2007-2010.
For BMW 135is, 535i, 535xi, X5 3.0 2008-2010
For BMW 750i, 750Li 2009-2013, For BMW 550i GT 2010-2013
For Mini Cooper N14 engine 2007-2012

Specification:
Part Number: 130195, 130192, 130193, 130194
Color: Black
Material: Metal
Package: 1x Sliding Hammern, 2x Puller, 2x Calibration Sleeve, 1x Adapter, 1x Assembly Cone, 1x Assembly Sleeve.

Notifictiaon:
Please note the seal must be replaced whenever they are removed from the cylinder head, or it may damage the cylinder head.
Please use accurate tool to remove fuel injector or it may get damaged and face fuel consumption.

How to remove the Injector:
Step 1. Assemble the tool, and screw the adapter on to the top of the injector;
Step 2. Matter upper & lower motion to pull the sliding hammer repeat;
Step 3. Pull out the whole tool and injector.
Step 4. Removal Finished.

How to Install the Seal:
Step 1. Remove old Teflon sealing ring with special tool (Not includes) from injector;
Step 2. Slide new Teflon sealing ring onto mounting assembly cone, then mount it onto injector tip;
Step 3. Push Teflon sealing ring into injector groove with installer (Not fingernails);
Step 4. Calibration sleeve is placed over the seal to compress it back to the correct outer diameter to allow installation into the cylinder head.