Throttle Cable for

Chinese Dirt Bikes, Pit Bikes, ATV's and Quads. Brands including: SSR, TaoTao, Sunl, Baja, Kazuma, Roketa, Carroll, Stream, Eagle, Tao tao, Redcat, Tank, Giovanni, Aimex, Jackel, Wildfire, Xtreme, Seaseng, Qlink, Yiben, Jonway, JMstar, etc.

Fit:
Proper length for most Chinese made PZ style slide carburetors used on 49cc - 160cc horizontal (dirt bike style) engines.
Package Includes:
1x throttle cable

Dimensions:
Total Length as listed
Barrel - .22in diameter - .25in length
Adjustment - about 1/2in

IMPORTANT - Will not work with:

Carbs w/throttle feed tubes longer than 1 inch - often found on Honda / Japanese dirt bikes
Extended slide carburetors used on Gas Bicycle engines and Mini Pocket Bikes & Delorto style carburetors
Will not work on GY6 engines or GX style engines unless they have a PZ style carburetor.
Please see images to identify your engine and carburetor

Throttle cable measurement:

required: tape measure or string & ruler
make sure to adjust your bars to where you like them
a - Missing/broken cable or non-stock handlebars
turn your wheel all the way to the left
Place one end of tape/string where the cable is screwed into the bars
Route the it the same way it would normally be routed to the carburetor
Take the measurement where the tape touches the top of the carburetor cable feed tube
or
Measure the string length when it is touching both the throttle body and the carburetor cable feed
Add 2.5" to 3.0" to the measured length.
This is the length of your cable covering & adjustment
Add another 4.25" to that length to get the total length

b - Measuring the original cable
lay the old flat and use a tape measure or ruler to get the total length

Please contact us with any questions or requests