Engine Tune-Up and Flush - Engine Restore Motor Oil Additive for Cleaning and Increasing Performance - Car Engine Flusher Treatment - Made to Extend Vehicle Life and Improve Engine Efficiency
FLUSH YOUR ENGINE: Bardahl's Engine Tune Up and Flush motor oil additive removes contaminants that harm engine performance and damage components over time! Once it catches all of the gum, varnish, and sludge that has built up in your engine you just flush it out and get ready for your car to run better than it has in years! This engine flush helps restore the performance of rings, pistons, valves, and other close tolerance parts while unsticking lifters for a complete chemical engine tune-up.
FOR HIGH PERFORMANCE: The Engine Power Booster motor oil additive is made for cars, trucks, recreational vehicles, and SUVs performing under the highest loads. Any high-temperature or heavy load operation in trailer towing, off roading, or RV usage will benefit with better performance and more protection against wear and the formation of harmful sludge, gum, and varnish deposits. This engine treatment oil additive also increases the life of your motor oil.
A COMPLETE CHEMICAL TUNE UP: Our engine treatment oil additive isn't just an engine cleaner, it lets your engine run easier to help extend the life of your vehicle. This is an engine cleaner that removes deposits of sludge, gum, and varnish from oil gullies and passages to allow your engine to run more efficiently which can improve your fuel economy and reduce operating temperature. This engine cleaner flush is made to give you better performance with each treatment.
WHEREVER YOU NEED IT: Bardahl Engine Tune-Up and Flush motor oil treatment is a special concentrated blend of solvents, dispersants, detergents, and anti-wear additive made to clean your engine and restore performance. Just pour the contents into the crankcase while the engine is idling and warm. Allow 100 to 200 miles to work through your engine (or run at a fast idle for 20-30 minutes) then change your oil and filter. Make sure to add a Bardahl oil enhancing product to your new motor oil!
A NAME YOU CAN TRUST: For over 85 years Bardahl has been based in America making the best additives in automotives. We're a family owned and operated company and we pride ourselves on producing the finest products in the marketplace while developing industry leading innovations.
Description
Only use the best for your car when you use Bardahl! Our Engine Tune-Up and Flush motor oil treatment is designed to catch remove gum, varnish, and sludge from your engine to unstick and clean critical components like lifters, rings, and valves while clearing oil gullies and passages! We use a proprietary combination of solvents, dispersants, detergents, and anti-wear additives designed to remove damaging contaminants from your engine with each flush. The results can be increased efficiency, performance, fuel economy, and extended vehicle life! This is a chemical engine tune up and engine cleaner flush that's made to capture removed deposits and keep them in suspension until your motor oil is drained. This motor oil additive is not meant to be used for the full life of your oil! We recommended adding Engine Tune Up and Flush about 100 to 200 miles before you intend to change your oil. You can also add it, run your engine at a fast idle for 20-30 minutes then flush. Just pour the contents of the bottle into the crankcase and be careful not to overfill. Then flush your oil and after 100-200 miles of driving and replace with new motor oil and a new oil filter. We recommend using one of Bardahl's oil enhancing treatments to your new motor oil. This includes twelve 12 oz bottles of Engine Tune-Up Exclusive Formula. At Bardahl we've been creating the best additives in America from our headquarters in Seattle, Washington for over 85 years. We've made our name a trusted source for mechanics, car enthusiasts, and in the world of motorsports with our constant commitment to quality and innovation.