DX7.5 Surge Brake Actuator for Disc Brakes 2" Ball 7,500 lbs Drum Brake Actuator Trailer Surge Brake Actuators Disc fits for Drum Brakes Model 750E

[Replacement Part] DX 7.5K Surge Brake Actuator Replacement Part#：099-175-20,‎ 099-175-00, 4332900, 70522. Rated up to 7,500 lbs GTW with a maximum tongue weight at 750 lbs.
[Capacity] DX7.5 Surge Brake Actuator is designed to handle up to 7,500 lbs of gross trailer weight (GTW)., fits 3" Wide Trailer Tongue 3" center to center mounting bolt holes
[Suitable with] The 7,500 lbs Surge Brake Actuator comes with a bolt-on installation, allowing for easy setup on most trailer tongues. Compatible with medium-sized trailers, boat trailers, utility trailers, and RV trailers
[Corrosion-Resistant Construction] DX 7.5K Surge Brake Actuator Made from durable steel with a corrosion-resistant finish,weather-resistant and prevents rust, extending the life of the actuator
[ Safety protect] Equipped with a breakaway cable that engages the brakes if the trailer disconnects from the tow vehicle. Additionally, the unit comes with an emergency lockout lever for reversing situations, preventing the brakes from engaging while backing up.

DX 7.5K Drum brake actuator uses the momentum of the trailer to actuate the brakes, suitable for Disc Brakes 2" Ball, 7500 lbs GTW - Zinc-Plated

Replacement Part#:

099-175-20,‎ 099-175-00, 4332900, 70522

Compatible with:

Brake Coupler Actuator Compatible with Titan, KODIAK, and Tie-Down Hydraulic Disc Brake Systems.

Rated for up to 7,500 lbs Gross Trailer Weight (GTW) with a maximum tongue weight of 750 lbs.

Compatible with hitches for 3" wide trailer tongues, 3" center to center installation.

Fits 2" balls and mounts onto a 3" trailer frame, 3 Mounting holes are on a 3" center front to back.

Feature:

The aluminum master cylinder features a plated design for superior corrosion resistance.

The sealed reservoir prevents moisture intrusion.

A latching mechanism securely locks the hitch ball in place.

It also includes an electric reverse solenoid, allowing for easy backing up without engaging the brakes.

The quick-lock mechanism automatically secures itself when lowered onto the hitch ball.

The rubber push rod boot offers protection against freezing.

Specification:

Name: hydraulic disc brakes

Material: Zinc-plated

Ball size: 2"

Capacity: 7,500 lbs (GVWR)

Suitable for 3" wide channel tongue

Maximum tongue weight: 750 lbs

KINDY NOTE:

1. Use with Drum Brake Only

2. For use with hydraulic disc brakes systems on 2-Axle only

3. Mounting hardware is not included.

PACKAGE INCLUDED

1 X Trailer Surge Brake Actuators Disc 75000 lb

Hello,