Part Number: JW1-H1950-00-00, JW1-H1950-00, 684-1271-012, 684-1251-012
Replace Part Number: JR3-H1950-00-00, JF2-H1950-00, J38-81950-01, 240-22272

Specification:
Voltage: 12V
Carry Current 150 Amps, Inrush 800 Amps
Terminals: 4
Duty: 100% Continuous
(2) 5/16-24 & (2) Non-Grounded 10-32 Studs
Mounting Type: Flat, L Bracket
Contact: Copper
Sealed Design
Mounting Instructions:
1. Select a desired mounting location
2. Using the contactor as a template, mark the centers of the mounting holes.
3. Using a ¼” drill bit, drill the holes marked in the previous step.
4. Mount the contact using ¼' bolts and nuts.
5. Wire the relay according to the wiring diagram.

If your application requires a sealed or submersible design, you must have this one.Sealed design protects against dust and water jets. IP67 environmental rating allows it to be submerged into 1 meter of water for a period of 30 minutes. It is not intended to operate under water. If this unit is exposed to water and completely dried off afterwards, it should be capable of being energized again.