【Pressure Gauge with Regulator and Relief Valve】The turbo boost keak tester is equipped with a 0-6bar (0-87psi) pressure gauge, making it easy for you to see the system pressure at a glance. The gauge is fitted with a pressure regulator, which can be adjusted by pulling up and rotating to the required pressure, and locked by pressing down. Turbo leak pressure boost leakage detector tool set is also equipped with a pressure relief valve to prevent overpressurisation.
【Quickly Locate Leaks】The turbo charger air pressure leakage tester kit is designed to accurately detect and locate leaks in the turbocharger, cooling system and emissions system of most cars and light trucks. Whether you're concerned about loss of boost pressure, coolant leaks, or suspect a turbocharger problem, it's the ideal solution. By finding leaks in a timely manner, you can restore your vehicle's performance, improve fuel efficiency, and extend engine life.
【Four Pairs of Step Adapters with Good Sealing Performance】The adapters of this boost leak tester have a stepped design, each adapter contains three different sized steps for different sizes of turbocharger, cooling or exhaust/emission system pipes. The adapters are made of high quality rigid nylon and metal material, which can be firmly installed on different pipes to ensure good sealing performance. The adapters range in outside diameter from: 1.38''/35mm, 1.57''/40mm, 1.77''/45mm; 1.97''/50mm, 2.17''/55mm, 2.36''/60mm; 2.56''/65mm, 2.76''/70mm, 2.95''/75mm; 3.15''/80mm, 3.35''/85mm, 3.54''/90mm.
【Easy Operation】Insert the appropriate adapters into the system's air inlet and exhaust ports and adjust the pressure regulator knob to set the desired pressure. Connect the pressure gauge to the air inlet adapter and then to a shop air source to pressurise the system. Once pressurised, you can watch the gauge to see if it maintains pressure and listen for any leaks. If the pressure drops, you can easily locate the leak by hand or spray.
【Caution】Excessive pressure may cause damage to system components. Most vehicle turbocharging systems are designed to handle a maximum pressure of approximately 15psi (1bar) to 25psi (1.7bar). Vehicle coolant systems are generally rated for 15psi. Turbo boost leak tester equipped with 3 air tittings (US, European, and Asian Types). Always consult the vehicle manufacturer's specifications for accurate information.
Tire Buffing Wheel, Acouto 38mm 70 Grid Tire Buffer Wheel Abrasiveness Coarse Buffing Wheel with Linking Rod Tire Patching Buffer Tool Tire Repair Patch Tools
KWD 4.500
Bearing Press Kit | 10pc Bearing Race and Seal Driver Set with a Driver Handle and 9 Discs Collar Axle Housing, Universal Tool for Bearing Races and Seals in Automotive Wheel Hubs
KWD 10
weyleity Bearing Race Seal Bushing Driver Disc Install Set | 17PCS Wheel Bearing Axle Bushing Tool Master Set Universal Aluminum Bush Drive Seal Kit for Motorbikes Wheel Bearings
KWD 7.500
2-in-1 Brake Bleeder & Vacuum Pump Kit | Essential for Brake & Clutch Maintenance, Handheld Vacuum Brake Bleeder Pump with Pressure Gauge, Adapters, and Case (Blue)
KWD 6.500
