★ Since the sticker is rolled up during packaging, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect.

PACKAGE INCLUDES: 5pcs (2pcs rearview mirror stickers, 2pcs car side body sticker, 1pc car hood sticker).

SPECIFICATIONS:

Material: Premium vinyl material.

Available Colors: Black/White/ Red.

Application: Universal for all cars, suvs, trunk etc. For car rearview mirror sticker, for car side body, for car hood.

Size: Rearview mirror sticker is 7.8 inch, car side body is 109.8 x 3.52 inch, car hood sticker is 46.85 x 5.9 inch-universal model.

♥ INSTALLATION STEPS ♥:

☞First, distinguish the three different sides of the sticker, the bottom paper, the sticker layer, and the transfer membrane.The bottom paper is the first to be torn off, and there is no stickiness on both sides.

--①-- Make sure where you want to paste and clean it out.

--②-- Removing the bottom paper of the sticker, spray water on the side of the sticker with glue to reduce the viscosity, which is convenient for adjusting the position and removing bubbles.

--③-- After sticking the sticker on the car body, lift the sticker on one side and scrape it slowly and gently from the other side with the card, while scraping the bubbles while adjusting the position of the sticker until the entire sticker is scraped.

--④-- Scrape off water and air bubbles with squeegee.

--⑤-- After scraping off the air bubbles, wait for the water in the sticker to dry, peel off the transparent transfer film carefully.(See description or video) The extra stickers at the door and the seam can be cut off with a knife.

ps: Due to the large size of the sticker, two or more people can work together to complete the sticker.