Search

Search

Circuit Probe Kit,6-24V Circuit Tester with LED Indicator,Car Electrical Tester Polarity Continuity Tester, Voltage Tester Probe Automotive Electrical System Tools

KWD 8.500
Brand
HUAREW
Category
Testers & Timers
Weight
200 g
– 1 +

Special Features

  • 【Function】 Continuity tester for testing components inside and outside the vehicle electrical system: This electrical tester can be used to test and activate components inside and outside the vehicle electrical system, testing voltage polarity, relays and diodes, fuses and circuit continuity, checking lights, checking motors, Track and locate short circuits, test for poor grounding, test cable and plug polarity, measure 6V to 24V DC voltage, etc.
  • 【Application】 1 Clamp the red clip on the positive pole of the car battery, 2 Clamp the black clip on the negative pole of the car battery, 3 Connect the car probe to the bad point of 6-24V DC. You can conduct positive and negative battery currents to the probe by shaking the power switch forward or backward. The cable length is about 4m. The device has short-circuit protection, when the current exceeds 7A, the device will automatically cut off the current.
  • 【Short Circuit Tracking and Locating】 The auto electrical tester uses advanced high-sensitivity probes to provide you with fast and accurate detection. Using the continuity tester can save a lot of time to troubleshoot the car wiring circuit, and quickly and accurately find the faulty wire and its fault point.
  • 【Wide Application】This circuit probe tester is suitable for of all 6V to 24V automotive electrical systems which works well on cars, trucks, boats, trailers, and motorcycles.(Note: Do not use under AC voltage.)
  • 【Remind】 Do not use this item near explosive gas, vapor or dust. When pressing the power switch (Note: or shaking), the battery current will be directly conducted to the pen tip, which may cause Sparks can be caused when touching the ground or certain circuits. Do not use the device under 11o/220V indoor current, only for DC6~24V system。There are detailed instructions in the product box, please refer to the operation.

Description

Circuit Probe Kit Instructions:

Unfold the cable of the unit

Clip the red clip to the positive terminal of the vehicle battery

Clip the black clip to the negative terminal of the vehicle battery

Circuit Probe Kit Specification:

Color: black

Working voltage: 6-24V DC

Cable length: 4 meters

Overload protection: 7A (when the current exceeds 7A, this item will automatically cut off the current)

Package size: 26.5cm*9cm*4cm

Package weight: 300g

Multifunctional Circuit Tester:
The circuit tester is a good tool for testing its grounding, and is a circuit tester for polarity testing and continuity testing. Equipped with LED & buzzer dual alarm. It is dedicated to test all 6V-24V DC vehicle electrical systems. Convenient and fast, to provide you with fast and accurate detection and a better experience.

High-quality Materials:
The automotive circuit tester uses high-quality ABS material, which is insulated, moisture-proof, heat-resistant, and durable. Equipped with high sensitivity stainless steel probes, it helps you quickly and accurately complete automotive circuit testing.

How to Use :
Before performing the test, please make sure that your tester is properly connected. Connect the red clip to the positive terminal of the car battery. Then connect the black clip to the negative terminal of the car battery.
Press button to “Positive”side with LED lighting RED, connect the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester.

Package List:
1 × Power Scan

1 × Probe Tip

1 × Battery Hookup Clips

1 × User Manual

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}