Specification: 8x170mm to 8x170mm PCD (Vehicle/ Wheel Bolt Pattern), SAE M14X1.5Thread Pitch, 125mm Hub Bore, 2pcs 3" thickness
RSOXTECH WHEEL SPACERS will widen your car's wheelbase, improving grip, handling, and precision. Developed in a special aluminum alloy through an innovative forging technology, afterwards they are wrought with CNC machine to obtain the perfect coplanar surface. They are heat treated to increase the mechanical resistance and next they are anodized to get the oxidation protection.
PLEASE MAKE SURE:
1. Spacers' PCD/ Bolt Pattern 8x170mm = Your Vehicles' / Wheels'
2. Spacers' Thread Pitch M14X1.5 = Your Vehicles' / Wheels'
3. Spacers' Thread Length 47 ± 0.3 mm >= Your Vehicles'
4. Spacers' Hub Bore 125mm >= Your Vehicles'
Check the recommended vehicle Compatibility/ Fitment below, do not risk for inappropriate vehicle.
2003-2022 F-2-5-0
2003-2022 F-3-5-0
2003-2005 Excursion
2003-2015 F-2-5-0 Super Duty
2003-2015 F-3-5-0 Super Duty
Notice：Do not fit 8x200 PCD
IMPORTANT NOTES:
Professional installation recommended. Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. Avoid an impact wrench; improper usage may cause lug nuts/bolts to break or loosen while driving, it will take potentially accident or injury. Make sure you get 6-8 turns before tightening. Re-torque all lug nuts / bolts after 25-50 miles of driving, then again 1-2,000 miles. The back of the adapter must sit flush against the vehicles hub. No rust on the inner of hub and wheel while installing the Hub centric wheel spacers. If the studs do pass the face of the adapter, you will need to grind/cut them shorter.