Search

Search

Thermometer,Humidity Meter,Hygrometer,Digital Thermometer,Room Thermometer Detection Sensor Transmitter Module, 4~20mA Voltage Transducer Acquisition Module Sensor

KWD 18
Brand
Keenso
Weight
156 g
– 1 +

Special Features

  • and Reliable: 10 ~ 30V wide voltage range input power supply, and reliable, beautiful appearance, easy to install, can be wall mounted or rail mounted
  • and Reliable: 10 ~ 30V wide voltage range input power supply, and reliable, beautiful appearance, easy to install, can be wall mounted or rail mounted
  • 4 ~ 20mA Analog Output: Adopts standard industrial interface 4 ~ 20mA analog output, can be connected to on-site digital display, PLC, inverter, industrial control host and other equipment
  • High Accuracy: The circuit adopts industrial grade microprocessor chip and high temperature and humidity sensors to ensure reliability, high accuracy and interchangeability
  • Material: Made of high-quality ABS material, , wear-resistant, small in size, using a dedicated analog circuit, a high- temperature and humidity measurement unit
  • IP65 dustproof: Industrial wall-mounted housing with high rating, IP65 dustproof rating, rain and snow and good air permeability

Description

Specific
Item Type: Temperature Humidity Transmitter
Material: ABS
Product size: approx. 147 x 88 x 41mm / 5.8 x 3.5 x 1.6inch
Degree of against dust: IP65
Power Wiring: 10 ~ 30V DC wide voltage power input
Output Interface Wiring: The device has 2 independent analog outputs as standard
Weight: approx. 157g / 5.5oz

Installation method:
1. Wall installation: There is a slide rail mounting plate on the back of the transmitter, please remove the mounting plate first. There are two expansion plugs and two self-tapping screws in the accessories. First, drill two holes with a diameter of 5mm and a depth of ?30mm in the wall (the distance between the holes is 70mm). After inserting the expansion connector, secure the slide rail mounting plate to the wall with self-tapping screws and finally slide it into the transmitter.
2. Slide Rail Installation: There is a slide rail mounting plate on the back of the transmitter, please remove the mounting plate first. The transmitter slides directly into a standard 35 rail.

Package List:
2 screws
2 expansion tubes
1 transmitter
1 manual

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}