Float Switch For Boat Bilge Pump, Automatic Bilge Pumps Float Switch For Boats, Suitable For V-Shaped Drive Flat Bottomed Boats, Water Tanks, And Aquaculture Systems

[Design]: The water pump is small in size, light in weight, and compact, suitable for use in narrow spaces at the bottom of the bilge. It has strong waterproof ability and consumes little energy during operation. 12V makes it multifunctional
[Easy To Operate]: Good installation design, easy to install and connect, with built-in floating switch that can automatically open when the ship's water level rises, ensuring that the water level is in a safe state.
[Application]: Suitable for basements waterlogging pits, submarines, and fishing boats, this water pump provides water at high flow rates and has sufficient time to reach the shore/dock before being seriously injured.
[Note]: The output port is an odd ball size. Flexible hoses can be used as adapters. During installation, two wires need to be installed on the manual switch, and then one more wire needs to be installed on the positive terminal of the battery, so that you can activate automatic mode.
[Specification]: Outlet diameter 29 mm (1-1/8 inches), width approximately 81mm, wire 1 m, voltage 12V, current 3.8A, flow rate approximately 1100 GPH under no water head and normal environmental working conditions. At a water head of 1 foot, the flow rate of a 12V battery at a current consumption of 4A is approximately 810 GPH. At a water head of 8 feet, the flow rate is approximately 585 GPH at 4.1A current consumption.

Hello,