🍺Check mash temperature instantly: With this brew thermometer, you can keep a close eye on your liquid's temperature. Just check the 3-inch dual scale dial which displays temperatures from 0 °F to 220 °F or -10 ℃ to 100 ℃. That way, maintaining the ideal temperature e.g. during the mash process is a breeze.
🍺Safe Materials: The dial thermometer is made from stainless steel, the washers from food-grade silicone. Those materials are durable, heat-resistant, hygienic, and rust-free. Hence, your beer won't taste metallic or be contaminated because of flaking or spalling.
🍺Easy installation: This standard 1/2 NPT thermometer can be attached easily to any brew kettle, fermenter, or pot with a big enough port. Simply stick the probe into the kettle and tighten it with the included hex nut. Also, don't forget to use the silicone gaskets which make sure that the thermometer sits tight.
🍺Clear and precise: The 2-inch probe is equipped with a sensor that measures the temperature of the liquid it touches precisely. The result will then be displayed immediately on the large, easy-to-read, high-contrast glass dial.
🍺Indispensable for homebrew enthusiasts: As a homebrew expert you know how important the correct temperature is during the entire brewing process. If it's too low or too high your beer might turn out too sweet or too bitter. With this thermometer, you can make sure that your brewing result turns out exquisite.
FLIR TG165-X Thermal Imaging Camera with Bullseye Laser: Commercial Grade Infrared Camera for Building Inspection, HVAC and Electrical & MR59 Ball Probe Moisture Meter with Bluetooth
KWD 199
United Scientific Supplies THTCF1, Red Spirit-Filled Thermometer, 12" Length, Total Immersion, Dual Scale, -20 to 110°C Temperature Range
KWD 3.500
Digital 2 Channels K-Type Thermometer with 4 Thermocouples for High Temperature Measurement
KWD 12.500
DGZZI 2PCS DS18B20 Stainless Steel Encapsulated Temperature Sensor Waterproof Digital Temperature Probe 1 Meter for Arduino
KWD 4
