1. The converter module is to convert 0~200hz digital into 0~10V analog .
2. The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
3. Input pulse level of 5/12/24V can be directly input without .But input frequency should maintain more than 0.5 seconds.
4. The module is made of premium material, and has long service life.
5. Professional and practically designed for premium working performance.

Specification:
Features:
The converter module is to convert 0~200hz digital into 0~10V analog .
The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
Input pulse level of 5/12/24V can be directly input without .But input frequency should maintain more than 0.5 seconds.
The module is made of premium material, and has long service life.
Professional and practically designed for premium working performance.
Specification:
Item Type:Frequency to Voltage Converter Module
Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in
Relationship,Linearity:
20Hz to 1V
100hz to 5V
200hz to 10V
Package List:
1 x Converter Module
Note:
1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter.
At 24 levels, the power supply needs to be powered by 24VDC
3. The input end is isolated by diaphragm. Guaranteed