RAINFLOW Bike Tire Repair Kit - User Manual
Kit Contents
√ 24 small round patches; 20 large round patches; 12 square patches: 2 metal tire levers: 2 tubes of glue: 4 pieces of sandpaper: 4 tire scrapers
How to Use the Tire Repair Kit
1. Remove the Tire
Use the tire levers included in the kit. Insert one lever between the tire and the rim, and gently pry the tire edge away from the rim.
Slide the lever around the rim to loosen the tire completely.
2. Locate the Puncture
After removing the tire, inflate the inner tube slightly to locate the puncture.
Submerge the inflated tube in water or carefully inspect it for escaping air bubbles to find the hole.
3. Clean and Prep the Area
Once the puncture is found, use the sandpaper or scraper to lightly roughen the area around the hole. This ensures the surface is clean and ready for the glue and patch to stick properly.
4. Apply the Glue
Select the appropriate patch size based on the size of the puncture. Choose between small round, large round, or square patches.
Apply a thin, even layer of the provided glue over the punctured area. Let the glue sit for about 2-3 minutes until it becomes tacky.
5. Apply the Patch
Place the patch over the glued area, ensuring it fully covers the puncture.
Firmly press the patch onto the tube, smoothing out any air bubbles and ensuring it sticks securely.
6. Test the Repair
After allowing the patch to bond for at least 5 minutes, inflate the inner tube again to check for any leaks. Make sure the patch is holding firmly and no air is escaping.
7. Reinstall the Tire
Carefully place the repaired inner tube back inside the tire.
Use the tire levers to reseat the tire onto the rim, making sure the tire edges are properly aligned with the rim.