The dc converter regulator is a high reliability power transformer. It features wide input voltage, low power consumption, high efficiency, high reliability. It can work safely and reliability in -40°C~80°C. It widely used in industrial, automotive, instruments, telecommunication and civil applications.

Input Rated Voltage: 12V DC

Input Voltage Range: 10V-16 DC

Output voltage: 24V DC

Output Current: 20 Amp

Output Rated Power: 480W

Efficiency: 97% (half load); 95% (full load)

Ripple: 200mVp

Line Regulation: ±0.2%

Load Regulation: ±0.2%

Voltage Accuracy: ±1.5%

Enclosures: IP68

Case Operating Temperature: -40~80°C

Wiring: OUTPUT+ to LOAD+, OUTPUT- to LOAD-; INPUT+ to BAT+, INPUT- to BAT-

Specifications:

1. 100% full power and stable current output, non-isolated module.

2. Industry grade DC 12V to DC 24V 20A 480W step up converter, efficiency up to 95%.

3. Die-cast aluminum shell, epoxy potting, cooling by free air convection; Waterproof level IP68 and anti-shock protection.

4. Protections: Over-current, Over-voltage, Over-temperature, Over-load and Short-circuit, auto-recovery when device is back to normal operating.

Note:

Never connect to solar panel, PWM/MPPT charge controller, inverter or wind turbine.

Never charge the battery. Keep good air convection.

Never reverse the polarity.

Use the enough big cable to avoid the voltage drop.