Search

Search

Dual DC Motor Driver Module Board, H-Bridge DC 3~36V 10A Peak 30A Speed Control PWM Module, MOSFET IRF3205 Quick Response Control Board for Arduino Robot Smart Car

KWD 8
Brand
Thincol
Weight
45 g
– 1 +

Special Features

  • DC MOTOR DRIVE BOARD: 10A dual-channel motor drive board, stepping DC motor with brake H-bridge balance car drive module, DC motor high-current full-bridge drive specially designed for robot competitions.
  • PWM MODULATION: It can work at 0%-99% PWM modulation duty cycle (note that it cannot be 100%), so that the motor can get enough driving voltage. When the motor is connected, it can not be directly given high level, and it should not be left floating. The best frequency is above 400HZ Frequency: 400HZ-20KHZ!
  • N-CHANNEL IRF3205 MOSFET: It can quickly open the MOSFET channel, improve the acceleration curvature of the motor, and also quickly brake the motor. This allows the car to start and kill the car quickly.
  • TEST: 1. Determine the PWM signal. Before testing the drive board, please use an oscilloscope or a multimeter to determine whether the PWM signal you provide is accurate (set PWM to 0 when the main program is executed). 2. Do not connect the motor first, and all other signal power supplies are normal. Use a multimeter or oscilloscope to test the waveform between the motors. 3. Connect the motor for testing.
  • NOTE: For customers who use for arduino STM32 microcontrollers, please note that because these microcontrollers take a long time to initialize, it is necessary to add a 2K pull-down resistor to PWM1 and PWM2 respectively.

Description

Features:
MOSFET driver chip comes with hardware brake function and power feedback.N-channel MOSFET IRF3205 MOSFET, use two dedicated half-bridge driver chip on the top tube using the boostrap capacitor, so that the tube has enough drive voltage of the MOSFET channel can be opened quickly, improve motor acceleration curvature, but also quickly for the motor brake. This allows the trolley can quickly start can quickly kill the car.The driver can operate at 0-99% of the duty cycle of the PWM modulation, the motor driving voltage can be obtained sufficiently.Specifications:
Condition:100% Brand New
Motor forward: DIR = 1 PWM = PWM
Motor reversal: DIR = 0 PWM = PWM
Parking brake: DIR = X PWM = 0 (X is an arbitrary state)
Motor and power connections
POWER connected to the positive power supply, GND power supply is negative. Two motors were connected MOTOR1, MOTOR2
Rated voltage: 3v-36v (can be customized according to the user)
Rated Current: 10A
Peak current: 30A
Size: Approx.108*58mm/4.3*2.3in(L*W)

Package List:
1*Dual Motor driver module board H-Bridge DC MOSFET IRF3205 3-36V 10A

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}