【Double-sided textured etching plate design】The 0.5mm thickened stainless steel plate surface plate is etched to give the surface a unique square and honeycomb touch, which fits the model better, increases viscosity, does not warp during printing, is very durable and resistant to high temperatures.
【Excellent adhesion for the first layer of printing】The model can be firmly attached to the surface of the print bed, and even beginners can print easily.Compared to traditional holographic build plates, it has a longer service life and no worries of film detachment, with good adhesion and no glue required. Please let the plate cool before removing the model to avoid damaging the coating.
High temperature resistance: PEI Honeycomb build palte can withstand high temperatures up to 200 ° C. Please Cleaning the K1 Max build plate before each use, excellent adhesion can be achieved. We recommend different filaments and their corresponding suggested temperatures for users: TPU:30-35°C; PLA:40-65°C; PETG: 50-80°C; ABS 80-120°C; ASA:80-120°C. Users can adjust according to their actual printing needs.
Parameter Suggestion: After leveling the platform, adjust the distance between the nozzle and the first layer of the hot bed to 0.1~0.2mm. It is recommended that the first layer of the model slice be set to 0.2mm.First layer speed is recommended 10~50mm/s. Print ABS, PETG class close blowing fan at first 3 floors. Close the blowing fan at the first floor when you print PLA. Depending on the recommended parameters for your consumables, it is recommended that the nozzle temperature of the first layer be 10 ° C higher than that of the other layers.
Attention and How to clean:Our double-sided texture build plate is suitable for 3D printers with a platform size of 310x315mm and is compatible for Creatily K1Max/Ender 3 V3 Plus/Ender 3 S1 Plus. Please confirm your printer type before purchasing. It is particularly important to note:Do not use "acidic, alkaline"cleaners to wash (such as soap, washing powder, washing liquid, dish soap, etc.), scrub with alcohol only before and after long-term use. Dry after scrubbing.
3D Printer Smooth PEO +Smooth PET Build Plate Kit, Flexible Spring Steel Platform for K1 Max 310 X315mm,(Without Magnetic Base)
KWD 6
5PCS Ender 3 V3 SE Hardened Steel Nozzles 0.4mm, High-Speed Printing and High Flow Extruder Nozzles for Ender 3 V3 SE/Ender 5 S1/Ender 7 3D Printer with 2pcs Heater Block Silicone Cover
KWD 6
3pcs Nozzle for Bambu Lab A1 Mini/A1 Print Head, Upgraded High Temperature Wear-Resistant Removable Hardened steel 0.4mm nozzle can be replaced for Bambu Lab A1/A1 mini 3D Printer Hotend
KWD 5.500
JUUPINE Upgraded 257x257mm H1H Build Plate for Bambu Lab A1 X1 X1C X1E P1P P1S, Double Sided Textured Flake+Galaxy Spring Steel Sheet Flexible Plate for Bambu Lab 3D Printers
KWD 10
