Outer diameter after recovery is 2.4mm, Length is 60mm.Easily use and avoid any damages to the optical fiber during installation
Clear sleeve make it easy to detect splice before shrinkage
Airproof configuration keeping the splice point's good resistance of humidity and temperature
Strength member is made from "Full hard" stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing
Hot melt adhesive tube made from polyolefin Ethyl Vinyl Acetate copolymer bonds both to the fiber and heat shrinkable outer tube to effectively encapsulate fusion splice
Justrite 8500, 3' Long Flexible Bonding Wire with Two Clips
KWD 19
Molex Micro-Fit 3.0 Dual Row (8 Circuits) Male & Female Receptacle Plug, w/Terminal sockets, (Pack of 1 Complete Set)
KWD 3.500
uxcell 10 Pcs 34 Position Female IDC Socket Flat Ribbon Cable Connector Black
KWD 4
-17%
uxcell 10pcs DIP IC Chip Socket Adaptor 2.54mm Pitch 7.6mm Row Pitch 2 Row 8 Flat Pins Soldering
KWD 2.500
