Double Sided Smooth Flexible Spring Steel Plate Effect Sheet for Bambu Lab 3D Printers,257x257 Camouflage+High-Rise Build Plate for Bambu Lab X1/X1C/X1E/P1P/P1S/A1 3D Printer.
【PEO+PET Design】We combine diamond PEO patterns and carbon fiber PET patterns on a spring steel plate. These two patterns are common and widely used in daily life, and are deeply loved by many 3D players. The diamond texture has a smooth surface and a matte tone, paired with silk or other glossy filaments, which will have a very good effect. The texture of carbon fiber is very low-key, and when used with charcoal gray filaments,it can achieve a good appearance effect.
【Easy to Remove】Sahvaim used high-strength spring steel plate, with good flatness and elasticity. It's not easy to deformation after repeating bending. Please cool the bambu build plate before removing the model .It can be easily disassembled without using other tools without damage, releasing your printing anxiety.
【Get Excellent Adhesion】First,Clean the bambu lab build plate before each use. You can use a damp tissue to wipe off any dust or fingerprints on the surface, and then use a dry tissue to wipe it dry, ensuring that the surface is free of fingerprints and other oils, otherwise it will affect the adhesion. Secondly,Choose filament with high quality and purity and keep them dry. Choose" Smooth PEI Plate/High Temp" on the slice.At last,Adjusting the temperature of the hot bed, We recommend these filaments & temperatures for your build plate “PLA: 60~65℃; PETG: 70-90℃;TPU:20-40°C. If you want to print other filaments, please adjust the parameters.
【High Temperature Resistance】The bambu lab PEO+PET print bed surface is resistant to high temperature 150℃.It is good to print PLA/PETG/TPU.If your printer is X1/X1C/X1E, please turn off "Enable detection of build plate position" before chosing the plate type.
【Compatible Printers】Our double-sided PEO PET build plate fits 3D printers with a platform size of 257x257mm, compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.Please confirm your 3D printer model before purchasing.
Description
This build plate has a size of 257x257mm and is specifically designed for Bambu Lab X1/X1C/X1E/P1P/P1S/A1 3D printers. It is widely compatible with various 3D printing filaments,such as PLA/PET/TPU; Its unique diamond PEO texture and carbon fiber PET texture are widely used in daily life, not only beautiful, but also to some extent improve the adhesion and printing quality of the model. It is made of spring steel material, which has excellent toughness. After the model cools down, it can be easily disassembled by gently bending it without the need for additional tools, greatly reducing the user's operational burden and anxiety.
Nema23 Stepper Motor 76mm Dual Shaft 3A 270oz-in 4 Lead Wire for CNC Router Engraving Milling/3D Printer
KWD 14.500
STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 3.0 Nm/424.92oz.in Nema 24 Stepper Motor & 0-8.0A 24-48VDC Closed Loop Stepper Driver CL57T V4.1
KWD 35
BIGTREETECH CAN Adapter V1.0 Expansion Module Board for BTT Pi Support CAN Bus
KWD 7
Nema 17 Stepper Motor 40MM Bipolar 1.5 A 42 Motor 42Ncm (59.47oz.in) 2 Phase 4-Lead Stepper Motor 1.8 Degree with 1m Cable and Connector for DIY CNC 3D Printer, 1.66x1.66x1.58inch
KWD 7
