Product Description
Features
1. Easy to handle
2. Threads are very smooth to lock and unlock
3. Good Acid and Alkali Resistance
4. High Temperature and Pressure Resistance

5. Great Corrosion Resistance

How to use it :
1. Pour the 100ml hydrothermal autoclave reactor into the reactor kettle, ensure feeding coefficient is less than 0.8.
2. You should put the corrosive reaction into PTFE bush, and should be assured kettle body from corrosion.
3. The 100ml hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the 220 ).
4. When finishing heating and need to cool, it's also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life.
5. After confirmation of intra-abdominal temperature below the boiling point solvents reaction system, it could be allowed to be open tank lid and do a follow-up operation.
6. The 100ml hydrothermal synthesis reactor each time after use to clean, to avoid corrosion. Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps.