Search

Search

DC5-12V/15-160V Stepper Motor Drive, Speed Regulator Forward and Reverse Control PWM Adjustable Stepper Motor Controller Signal

KWD 5
Brand
Podazz
Weight
110 g
– 1 +

Special Features

  • 【Wide Power Supply Compatibility】This control unit operates on a power supply ranging from 15-160VDC or the lower range of 5-12VDC. For the lower voltage input, connect the positive terminal to the DC 5-12V input and the negative terminal to the common cathode end.
  • 【Tunable Frequency Bands】It offers three distinct frequency settings to suit various motor control requirements: a high-frequency band of 5.8KHZ to 127KHZ, a mid-frequency band of 590HZ to 15.8KHZ, and a low-frequency band of 82HZ to 2.3KHZ.
  • 【Stepper Motor Integration】To effectively control a stepper motor, it must be connected to a compatible driver. The control unit facilitates this with specific terminals for pulse and direction inputs.
  • 【Control Terminals】The PUL+ and PUL- terminals provide pulse signals for motor activation, while EN+ and EN- are the enable terminals for turning the motor on and off. The DIR+ and DIR- terminals determine the direction of motor rotation.
  • 【Frequency Measurement Capability】The frequency can be measured across the PUL terminal and the common cathode terminal (GND), offering a diagnostic port for checking the motor's operational frequency.

Description

This controller has the same original function, but has the function of generating PWM signal. There is a jumper on the board, which can be set and selected. The default setting is to generate pulse frequency signal.

REQ is to generate pulse frequency signal

PWM is to generate PWM signal

Length*width*height:73*51*37MM

Product description:

1. This module is a pulse generation module, which supplies the stepper driver as a signal. If you want to control the stepper motor, you must also match the driver.
2. This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform. Now the controller has 3 frequency signals of high, medium and low, which can be selected by jumper.

The frequency parameters are approximately:

High: 5.8KHZ-127KHZ

Medium: 590HZ-15.8KHZ

Low: 82HZ-2.3KHZ

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}