110V 600W Electric Balloons Pump for Birthday Party Wedding Prepare
This Electric Balloon Air Pump Inflator has Advanced Wire storage (when not used, you can store the wire to avoid being damaged) and Automatic protection device, when the pump unattended too long time, the pump will automatically disconnect the power supply.
Please be aware that this product will only fill the balloons with air, not helium or hydrogen.
This machine only for latex balloons, do not inflate long balloons.
DO NOT continuously working more than half an hour, take a rest for better working.
Specification
Size: 7.6n x 6.2in x 5.2in
Weight: 2.4lb
Input voltage: 110-120V
Motor Power: 600W
Pressure: 1300pa
Inflation Rate: 750 (L/min)
Frequency: 50/60Hz
Noise:
we use the pure copper motor,large powerful and more long working life.
Electric Balloons Pump include manual and automatic two models, allow to blow 2 balloons at same time. Free your mouth or hand from hard blow the balloons,saving time for party preapre. Small and powerful,easy to use and light weight for carry out.
Two Operation Modes
This electric balloon pump is designed with two operation modes, one automatic and one semi-automatic. Please choose the right mode for different balloons. If automatic mode is too fast, then please choose semi-automatic(press-on) mode, which will avoid blowing balloons burst. When using semi-automatic mode, just simply plug in the pump, leave power switch to "off" position and press the nozzle to inflate. If stop pressing, inflation will stop as well.
Wide Application
The high-quality electric balloon pump can inflate hundreds of decorative latex balloons in super-fast time and commonly used in some activities/ festival/ party/celebration/ decoration, easily create a warm atmosphere.
Notice: Don't used for inflatablebed or inflatable boats and other BIG inflatable things.
How to Use - The Most Effective Way:
1 Plug the US port into an outlet
2 Pick up a balloon with any sizes
3 Insert the balloon neck or opened tail into a BLUE nozzle.
4 Press the nozzle and let go to release air into the balloon
5 Use a knot tying tool to tie the inflatable balloon
How to use balloon knot tying tool?
1.Place the balloon knot tying tool on three fingers of your right hand;
2.Hold the balloon in the left hand, and pull the balloon from right side of the balloon knotter to the left;
3.Put the balloon around the balloon knot tying tool and circle it from bottom to top;
4.Put the tail of the balloon into the slot in a knotted manner, and finally pull out the knotted balloon.