Specifications:
Size: 55*24*22mm/2.17*0.94*0.87inch
Input voltage: 3V-6V
Input Current: 0.5A-2A(depending on the input voltage)
Input line length: about 10cm/3.94inch
High Voltage type: DC type
Output voltage: about 700KV (please pay attention to safety when used)
Output current: 0.5A
Output line length: about 10cm/3.94inch
High voltage poles ignition distance: ?1.5cm(1.5cm is maximum distance, 1cm is better)

Note:
1.Input the power of 3-6v, output two levels of terminal can produce 1.5cm length high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.
2.On the input power: 3.7-v lithium battery can be used in series, such as battery, idle cell phone battery (to remove the board, recommended capacity 2000mAh) or -/Nimh battery pack, 4V or 12V batteries(12V battery works best)

Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance( 3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use 2000MA lithium, it is better to choose 4000MA battery.

Package Included:
1 x High Voltage Pulse