Search

Search

GDSTIME 30mm 3010 Fan 24V, 30x30x10mm Dual Ball Bearing High Speed Brushless DC Cooling Fan 2pin with 1000 mm / 3.3 FT Cable Wires for CR6 SE Ender 3 Max 3D Printer Extruder Hotend V6 V5, 2-Pack

KWD 5
Brand
GDSTIME
Category
Fans & Cooling
– 1 +

Special Features

  • Mini Size 30x10mm: The fan can be used to replace a broken hotend cooling fan for 3d printer; also suitable for stepper motor driver, cart changer, control board, humidifier and other small appliances that requires cooling or ventilation
  • Long-lasting Ball Bearings: This Brushless dc fan comes with Dual Ball Bearings that has an operating lifetime of 50,000 hrs; It has got seven airflow-optimized fan blades that are designed for achieving better heat dissipation
  • 3.3 FT Long Cable Wire: XH2.54 2Pin Connector with 1 meter (3.3 ft) cable wire for power supply; make sure positive (Red wire) and negative (Black wire) poles are in right place; Startup Voltage: 6V; Opearating Voltage: 14 to 26V (If over 26v, it also can wirk, but will affect the fan life)
  • 3010 Fan 24V Specs: Size: 30 x 30 x 10 mm (1.18 x 1.18 x 0.39 inches) | Hole to Hole Distance: 24 mm (0.94 inches) | Rated Voltage: 24V | Rated Current: 0.06 A | Power: 1 W | Speed: 12000 RPM | Noise: 27.46 dBA | Airflow: 4.7 CFM | Static Pressure: 0.47 In H2O
  • What You Get: Includes 2 Pack DC 24 volts 2-pin 30x30x10mm brushless cooling fans and 8 pieces screws and nuts for easy mounting; The lightweight mini thin design won't take up much space, so you can keep your area neat and tidy

Description

30mm x 10mm Fan Description

This is a mini size 30x30x10mm cooling fan, which is made of PBT plastic material. bearing is high precision, long life and low noise. Containing high quality dual ball bearings, the fans can be run continuously for 50,000 hours; Ideal replacement for noisy or broken 24V 3cm fans in 3D printers, stepper motor driver , cart changer, control board, humidifier and other small appliances

Porduct Dimension
Total Dimensions: 1.18 x 1.18 x 0.39 inches (30 x 30 x 10 mm )
Hole to Hole Distance: 0.94 x 0.94 inches (24 x 24 mm)
Screw Hole Size: Ø 0.12 inches (Ø 3 mm)
Connector: 2-Pin
Cord Length: 39.37 inches (1000 mm)

Product Performance and Technical Specs
Total Airflow: 4.7 CFM
Total Noise: 27.46 dBA
Fan Speed: 12000 RPM
Operating Voltage: 14 to 26V DC
Power: 1 W
Current: 0.06 Amp
Static Pressure: 0.47 In-H2O
Operating Temperature: 14 to 167°F
Fan Bearings: Dual Bearing
Life Expectancy: 50,000 Hours

Package Includes:
2pcs 30x30x10 mm 24v 2pin cooling fan
8cs Screw and Nuts
Note:
1.Transition: 1cm=10mm=0.39 in.
2.Please allow 0-1cm error due to manual measurement. please make sure you do not mind before you ordering.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}