Creality 3D Printer Build Plate for K1/K1C Build Plate/Ender 3 V3/Ender 3 V3 KE/Ender 3 V3 SE Build Plate/Ender 3/Ender 3 V2/Ender 3 S1/Ender 5 S1 and All 3D Printers (Creality Black 235 * 235mm)
【Creality Official】Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C，Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
【Easy Model Removal】When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
【Excellent Adhesion】Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well.
【Simple Installation】Each Creality PEI+PEY sheet is equipped with two sides - one Phantom textured PEY coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to the filaments of corresponding materials, allowing you to choose the appropriate side based on your printing requirements.Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
【Wide Application】With a size of 235*235mm (9.25*9.25inch), this build plate is compatible with Creality 3D printers such as K1,K1C,Ender 3 V3,Ender 3 V3 SE,Ender 3 V3KE, Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, and other similarly-sized FDM 3D printers. After installation, please ensure to re-level the print bed to enhance the printing quality.
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Capricorn Tubing
KWD 8
-6%
Creality Ender-3 Hotend Kit, Upgraded Blue Teflon Tube, Smooth No Clogging, Compatible with Ender-3, Ender-3 pro, Ender-3S, Ender-2 Pro 3D Printers
KWD 7.500
Creality Original Ender 5 Hotend Kit for 24V Ender-5 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block Assembled
KWD 6.500
Creality K1 Max Build Plate Kit 315 * 310mm, 3D Printer Platform with Frosted PEI Surface and Soft Magnetic Sticker for K1, K1 Max, Ender 3 Max Neo, Ender 3 S1 Plus 3D Printers
KWD 14.500
