Search

-9%

1/2" Bridge Construction Tapered Reamer Bit,M2 HSS Clamping Reamer with 1/2" Non-Slip Handle,12mm-5 Spiral Edge Design Car Reamer for Steel, Alloy,Wood,Plastic,for aligning or enlarging Holes

KWD 10
KWD 11

Brand
QUEYAAM
Category
Reamers
Size1/2 in
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
1 +

Special Features

  • 1/2'' tapered reamer drill bit is used to aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation. Excels in tackling steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic and PVC pipe etc. 1/2'' tapered reamer can enlarge holes to 12mm
  • M2 High Speed Steel Material: Compared with other commonly used low grade high speed steel, M2 tungsten content is 50% higher, molybdenum content is 150% higher, with better high thermal hardness, high wear resistance, high hardenability, so that our 1/2'' tapered reamer has enough plasticity and toughness, can withstand large impact and high load operation.
  • Fine Detail: 1/2'' reamer drill bit features a non-slip 3-sided handle, tapered point and safety stop design to ensure a safe grip on the chuck. Precision edge left spiral design, effective removal of debris, so that the reaming hole is smooth, no tear. Provides you with unmatched security and durability
  • Tapered Point Design: Allows the 1/2'' reamer bit to enter overlapping holes so that the bolt holes are aligned. Widen the knuckle and the hole in Pittman's arm.
  • Please Note: Always wear appropriate safety equipment. 2. Properly install 1/2'' reamer drill bit in the tray of the portable electric or pneumatic tool. 3. Place the drill bit in pre-drilling, gradually increase the speed, keep the pressure stable, and add cutting oil. 4. When approaching the desired hole size, reduce the speed to obtain a smooth surface.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}