Fit Die Size: M22-M24 Metric Dies / 55mm Outer Dia. Dies
Round Die Stock Size: 55mm / 2.17"
Total Size: 495mm x 25mm / 19.49" x 0.98" (L*T).
Material: Zinc Alloy
Surface Treatment: Pray-paint Coating
Package Contains: 1 x Round Die Stock Handle Wrench

Round die holder is made of zinc alloy, which has good corrosion resistance, a beautiful shape, and is relatively light and portable. The paint coating on the surface provides additional protection against rust and wear, to extend the service life of adjustable wrenches.
Round die stock handle is designed with 5 adjustable screws to fix the die, die frame can firmly fix the round die and is easy to operate. The frame helps to keep the cutting tool aligned. It can ensure that the thread spacing is even and cut to the required specifications.
Die handle wrench (when used with round dies) can be used on mild steel, aluminum, plastics, and most metals, helping to process, repair, correct, clean external threads, or simply remove bolts and threaded rods. Suitable for house renovation, DIY home improvement projects, construction, auto repair, factories, etc.
The positioning slot of the mould (not included) should be aligned with the tightening screw of the wrench, and the screw should be inserted into the mould slot and tightened. Before you start tapping, apply cutting oil or lubricant to the workpiece and die to get smoother, cleaner threads.
Every 1/4~1/2 turn needs to be reversed to facilitate the discharge of chips from the chip removal hole. Apply even and consistent pressure when turning the handle. Tighten the mould base's adjustable screws firmly around the mould to ensure a secure grip.