Thread Checker & Drill Bit Gauge: Quickly identify up to 34 different sizes of bolts & nuts, covers the most common 19 standard (from 6-32 Coarse to 3/4-10 Coarse) and 15 metric (from 4mmx0.7 to 16mmx2.0) thread sizes. There are also 8 drill bit gauges to identify the size of common bits(from 4mm to 14mm, 1/4in, 1/2in).
Friendly design: For large nuts, our thread checker widen the spacing between bolts. Four corners are rounded and the included hanging holes make it easy to hang and carry. There are non-slip pads on the back that can be unscrewed and hung to the wall.
Made of All Metal: The screws are made of stainless steel and the board is made of lightweight aluminum for long-term use. The solid back plate is up to 0.2 in/5 mm thick.
Easy to Use: The surface features clear and easy-to-read metric and imperial measurements laser-etched, and length scales (15cm and 6 inches) on both sides make it easy to quickly measure nut/drill bit lengths.
All-in-one Design: All accessories are neatly fastened to a solid aluminum plate, ensuring that you can use it quickly and orderly every time, avoiding the hassle of confusion and loss.
Note: 1. When testing nuts or bolts, please do not use excessive force to avoid damaging the threads due to incorrect. 2. Since the feet are pre-installed, if you need to hang it on the wall, please unscrew the feet first.
Description
Thread Checker, 34 Nut & Bolt Thread Size Checker with 8 Drill Bit Gauge, Thread Gauge Identifier for 19 Standard & 15 Metric, Aluminum Board Steel Bolts
ICOVITA Dial Indicator Dial 0-15-0 Reading 0-0.03 " Gauge Range 0.0005" Graduation 1.25" Diameter
KWD 8
-18%
INSIZE 6301 Micrometer Stand
KWD 14
Dial Test Indicator Gauge, 0-40-0 0.01mm Exactness Metric Dovetail Rails Dial Test Indicator Dovetail with 2 Probes (Tungsten Steel)
KWD 8.500
Feeler Gauge, Stainless Steel Welding Taper Gap Gauge Depth Ruler Hole Inspection Tool,Two Measurement Systems of Mm and Inch
KWD 3
