Product content
1*module
1*transmitter with battery

Operation
Connect to power.
Press the button ▲: Motor rotates in positive direction
Press the "Lock" button: Motor stops.
Press the button ▼: Motor rotates in reverse direction
Note: You cannot press the UP and Down simultaneously.
If motor rotates in positive direction, first you need to stop motor, then let motor rotate in reverse direction
Module programs use sleep mode, its low power consumption, Suitable for batteries For the possibility of automatically in low power consumption state of dormance, So, when used there is 1s delay

Performance reference
1. Output voltage Input voltage Supply voltage
2.When you use, the module gets a little hot, that's normal, don't worry
3.Control module with overcurrent protection, starting current is less than 400mA, normal use
4.If the starting current of motor is greater, it can close once at start moment.
5. Protected from countercurrent and excessive current.
6. Dormanz program, save electricity design
7. The outputs: positive and negative change, and can only be with transmitter to control.
8 The magnetic induction coil current is the largest state in general, so it will have non-stop flash.