Door Hinge & Door Latch Installation Kit, Door Hinge Mortiser Template, Door Latch for Accurate Chiseling and Scoring, Door Lock Installation Kit, Easy to Set Up and Use
【Come with Two Tools】:Door Hinge Jig and Door Lock Installation Kit are perfect kits for door installation, greatly reducing the use of other tools, sufficient and easy to carry, Recommended for carpenters and DIY persons.(Note: The hinge jig only work on the door not the jamb.)
【Easy to Set Up and Use】:The hinge template can adjust hinge length, thickness and rounded or square corners, Radius 1/4” or Radius 5/8”. Door latch kit is suitable for 1-3/8" or 1-3/4" door thickness, rounded and square corner latch, both come with the required drill bits to ensure hinge and latch installation screws are perfect.
【No Need for a Hammer and Chisel】: The hinge template only requires a router to install your door hinge (Router not included). The latch install kit built-in scoring and chisel tools, greatly reducing the number of tools you need to bring to the job site.
【Door Latch Installation Kit】: Built-in scoring and chisel tools, switchable round and square blades, 1* Router Bit, 1* 90°Fence, 1*1-inch PH2 bit, 1*1-inch SL 8-10 bit. One latch tool for both cutting and installation.
【Door Hinge Jig Kit】: 1 Door Hinge Mortiser, 3 Included Bits – 1x Router Bit, 1x Self Centering Hinge Bit, 1x PH2/8-10SL Double Ended Screw driver Bit. A door hinge jig helps you cut professional-looking door hinge shapes.(Note Again: The hinge jig only work on the door not the jamb.)
-30%
Prime-Line E 2281 Passage Door Latch, 9/32 In. and 1/4 In. Square Drive, Steel, Brass Finish (Single Pack)
KWD 3.500
-20%
Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3" to 5" Length and 1/4" or 5/8" Thickness.
KWD 12
KS Hardware Kerf Style Replacement Door Bottom with Double Bubble - Creates A Weatherproof Seal - Easy Install - 31-3/4 inch, Brown
KWD 11.500
-17%
Floor Rubber Transition Strip Self Adhesive Carpet to Tile Transition Strip Edging Trim Strip for Threshold Transitions with a Height Less Than 5 mm/0.2in (Coffee, 6.56FT)
KWD 5
