Filament Dryer Box for 4 Spools: Sovol SH04 is capable of accommodating four 1kg / 0.25kg / 0.5kg spools simultaneously. It is equipped with 4 PTFE tubes, meeting the demands for drying multi-color filaments and enabling multiple printers to print at the same time
Rapid Heat & Dry Evenly: Sovol SH04 is the fastest heating filament dryer box for 4 spools on the market. equipped with 2 heating bar in the bottom and a fan on the right side of the box. Thanks to the 690W max power heating bar, SH04 filament dry box achieves rapid heating up from 25°C to 50°C (test room temperature is 20°C）within 13 mins, saves 58% time compared to Sovol SH01
One Knob to Start: If you have a large number of work requirements for multiple 3D printers at the same time, SH04 will be your best choice. No need to set temperature every time. The default heating temperature of SH04 filament dehydrator is 50°C which cannot be changed. You just need to rotate the knob to set any time within 2 hours, which is more convenient than button setting. Besides we adds a new time mode for SH04 - Stay on. Turn the knob counterclockwise to the end, the filament storage box will keep running until you need it to be off. This reduces setup complexities and enhances your user experience
Designed for Certain Types of Filaments: The design original intention of Sovol FilaDryer SH04 is adaptive to a part of filaments. The default heating temperature of SH04 filament dehydrator is 50°C which cannot be changed. After market research, we found that 50°C is actually suitable for most filaments such as PLA, PLA+, Wood, PETG, ABS, PVA, PVB, TPU, HIPS and PMMA. Intelligent temperature control would keep temperature in the box at 45-55°C, ensuring long-term use safety
After Sale Service: We provide a lifetime of professional technical support. If you encounter any issues when using SH04, please let us (seller) know
-21%
Sovol Filament Dryer 2023, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS
KWD 22
Sovol SV06 Plus 3D Printer Coming with 1 Spool 1kg Blue PLA Filament, 300℃ High Temp 150mm/s High Speed All Metal Hotend, Dual Gear Direct Drive Touch Screen Auto Leveling 11.8x11.8x13.4 inch
KWD 141.500
-6%
3D Printer UV Resin Curing Light for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect with 60W Output Affect, DIY Curing Enclosue US Plug
KWD 7.500
IR-Sensor IR Filament Sensor with Steel Ball, Magnets, Screws Kit for 3D Printer Prusa i3 mk2.5/mk3 to mk2.5s/mk3s Upgrade
KWD 4.500
