Thirty Minutes Cure: Golf club glue is designed for quick repair of golf clubs without the need for a trip to a repair shop. The golf club head glue fully cures in 30 minutes, allowing you to return to the golf course
Work in 5 Minutes: Golf club epoxy for steel shafts has a working time of 5 minutes. Within 5 minutes of working time, apply golf epoxy to the parts of the golf ball that need to be repaired or replaced, and wait for it to be fully cured before use
Designed for Golf Clubs: Our golf epoxy shaft epoxy is designed for golf clubs. When your golf club head is damaged or you want to replace it with a new one, you can use our golf epoxy glue directly to complete the bonding repair without going to the repair shop
Easy to Use: This golf epoxy adopts a push rod design, extrude the paste in tube A and tube B in a 1:1 ratio, stir evenly for 20-30 seconds, apply epoxy resin glue on the used part, wipe the excess glue with alcohol, and wait for curing before use
After use, the bottle cap should be cleaned and sealed to prevent it from sticking and not being able to be unscrewed. Golf resin will become hard after being stored for a long time. If you have any questions, please get in touch with us to help you solve the problem
Description
How to use
1. Polish the head of a golf club with a tool
2. Divide equal parts A and B epoxy resin
3. Mix epoxy thoroughly until uniform (20-30 seconds)
4. Apply epoxy to the worn area of the golf club
5. After applying epoxy resin
6. Screw the rod body into the sheath of the rod head to apply all surfaces
7. Wipe excess epoxy off the cue with alcohol
8. Hold the club upright for at least 30 minutes