1. This cable is female to male. One end is connected to the controller, the other end is to motor.
2. It fit most 250W--1000W hub motors on the market, easy to connect.
3. Normally 80cm for front hub motor and 160cm for rear hub motor depending on the model
4. 9 pin female to male motor extension cord with arrows marks.
5. We care for each customer's feeling. If you have any question about this item,just contact us,we will reply you quickly.
Description
We recommend using a 80cm cable for the rear hub motor and 160cm cable for the front hub; the blue, green and yellow wires are phase wires, and the other 6 wires are Hall sensors, of which the white wire is the speed measurement signal wire.