Description
An AC contactor is widely used in power on and off and circuit control. It will control the electric city's flow to all the unit's parts. If your contactor is broken or burned, the AC unit will lose its ability to cool the home adequately and may run continuously, maybe it is time to change it.
EXACT REPLACEMENT FOR YOUR FAILED CONTACTOR
The AC contactor may need replacement when it develops a fault or goes bad. BlueStars 1 Pole 30 Amp 24V Contactor will replace your bad AC contactor to provide power to the compressor and condenser to turn your AC unit on and off, control the flow of electricity to all parts of your unit and get it to work again.
SIMPLE INSTALLATION
Our 1 Pole 30 Amp 24V Contactor is straightforward to attach, load and use. You can follow the 05 following steps:
Shut off the power to the AC. Verify that the power is off with a multimeter.
Mark the wires and their location on the contactor, then remove them from the contactor.
Remove the mounting screw then mount the replacement contactor
Reconnect the wires, and ensure that the wire connections are tight
Turn the power back
*Don't forget to wear gloves and shut off the power to the AC and the furnace/ air handler.
SPECIFICATIONS
Poles: 1 (Single)
Coil Voltage: 24 VAC
Rated current/ Amperage (FLA): 30A
Compatible devices: Up to 600 VAC
AC Frequency: 50/ 60 Hz
Operating temperature: -25℃ - 70 ℃
*It is alright to replace a unit with one having a higher rating but not the one with a lower rating