BIQU MicroProbe v2.0 Auto bed leveling sensor offers a sleek,futuristic build with a stylish black finsh, featuring geometric car-inspired design elements and a slick indicator LED，suitable for all FDM CoreXY/I3 printers,such as Ender 3,Ender 3 V2,Ender 3 Max,Ender 5,Ender 5 pro,CR10,Voron Steathburner,EVA 3,BIQU B1,BIQU H2 Extruder,RatRig VC3...etc 3D priter.
Notes：
The wiring of MicroProbe is the same as BLTouch. but Microprobe works differently from BLTouch, the firmware MUST be re-configured for Microprobe, Failed to do so will result in un-recoverable hardware damage. It uses a 5V power supply, and its control signal line is compatible with both 3.3V and 5V.The detection signal line is an open-drain output, which requires a 10K pull-up resistor on the mainboard's signal line or setting the 10 as a pull-up input in the firmware. (For the Microprobe v2.0, the detection signal line requires a strong pull-up, as some chips have weak internal pull-up capabilities. Therefore, it is recommended to connect it to a port with an external pull-up resistor, For example, Z-STOP port.)
Product Parameters:
Product Name: MicroProbe
Total Weight: 6g
Voltage: 5V
Standby Current: 3mA
Maximum Current: 2A
Cable Length: 1.5 m Wiring: 5 pins, 1.25 mm Pitch
Working Chamber Temperature: ≤60°C
Accuracy: 0.001mm Standard Deviation @24°C Ambient, 60°C Bed,0.003mm Standard Deviation @60°C Ambient.
Lifespan: 10,000,000+
Compatibility: All FDM 3D Printers
Main Features:
1. Ultra small, fits into more places;
2. Lightweight design;
3. Easy installation;
4.Compatible with a wide range of FDM printers;
5. High precision and reliability;
6.Removable and replaceable probing pin.