WEICON Contact VA 110 Cyanoacrylate Adhesive PROPERTIES: The liquid adhesive is medium viscosity & very economical. One drop is sufficient for approx. 3 to 5 cm² of adhesive surface. APPLICATION : WEICON Contact VA 110 Cyanoacrylate Adhesive can be used in sensitive areas, such as in the food & drinking water sector, in the pharmaceutical industry or in toy manufacturing for rubber & plastic bonding. In combination with WEICON CA Primer, it is also suitable for difficult to bond plastics, PTFE, thermoplastic elastomers & silicones. PROCESSING: Clean & dry the surfaces to be bonded. Roughen smooth surfaces mechanically. Apply the adhesive only to one of the surfaces to be bonded with a layer thickness of min. 0.05mm & max. 0.2mm & relative humidity of 40 to 80%, otherwise curing cannot be guaranteed. In case of large-area bonding, the contact adhesive should be applied pointwise to avoid internal tensions. STORAGE: WEICON Contact Adhesives are stable for at least 9 months if stored unopened at room temperature and in a dry & preferably dark place. At temperatures around +5°C they can be stored for 12 months. SAFETY: When processing WEICON products, the physical, safety, toxicological & ecological data and regulations of the EC safety data sheets must be observed. TECHNICAL DATA: Ester type: Ethyl. Composition: colourless, clear liquid. Final strength after: 24 hours. Temperature resistance: -30 to +80 | Softening point +160°C