Specification:
Item Type: CW/CCW Controller Module
Optional Input voltage: DC 5V (5V version), DC 6-24V (12V version)
Module working current: forward 2MA, reverse 35-40MA
Load voltage: equal to output voltage
Load current: maximum. 2A (motor With power indicator and reverse polarity indicator
Control mode: low pulse control
Size: Approx. 43 x 21 x 16mm / 1.7 x 0.8 x 0.6in
Weight: 13.5 g / 0.5 oz(approx.)
Pin description:
I +: power input +;
I-: voltage input-;
O +: power output + (The output in reverse polarity is-);
O-: power output-(The output in reverse polarity is +);
G: ground;
T: input (0.2-2 seconds low pulse).
Instructions:
1 After power on, output = input, press the button, reverse polarity output, the button again, output = input, third button, reverse polarity output. And so on.
2 Turn off the power and stop the output.

Package List:
1 x CW/CCW Controller Module

Note:
1. For the module to work stably, be sure to use a power supply that is twice the load power. If the load is a motor, use a power source with more than 3 times the power.
2. The maximum load current is 2A. If it is a load motor, the maximum load current is 1A.
3. The module can only control forward and reverse (start and stop are controlled by power on and power off)