#8 x 3/4" Stainless Steel Phillips Truss Head Fast Self Tapping Screw for Metal Black Oxide Metal 18-8 Modified Truss Head Self Tapping Sheet Metal Screw 410 Stainless Steel Black (50 Pack)
Replacement Screw Diameter: #8, Length:3/4 inch 50 pack
Our self-tapping screws are manufactured from high-grade 410 stainless steel, known for its superior strength, corrosion resistance and durability. These screws are slightly magnetic, providing extra convenience in certain applications
These self-drilling screws are perfect for a wide range of applications, they are ideal for use in the home, office or at work, including small repairs to plastics, wood, metal and more. With their sharp self-drilling points, they easily penetrate metal surfaces without pre-drilling, saving you time and effort
Typically used for metal-to-metal connections in applications such as HVAC, electrical installations, and metal framing. These screws are self-drilling and self-tapping, allowing them to be drilled and tightened at the same time during the installation process
Self-drilling screws are widely used in construction, carpentry, and other applications where quick installation is required. They are designed to increase installation speed and efficiency by eliminating the need for pre-drilling
Screws feature a truss head design that provides greater surface area for distributing force, resists slipping during installation, and sinks quickly and easily, making them ideal for a variety of metal, sheet metal applications
The 410 stainless steel construction provides excellent rust and corrosion resistance, making these screws suitable for both indoor and outdoor use. They can withstand moisture, chemicals and other harsh elements to ensure long-term reliability!
Description
The installation methods and tips for self-drilling screws are as follows:
1, choose the right tool: using a power screwdriver or drill is the best way to install self-drilling screws. Make sure the torque of the power tool is moderate to avoid damaging the screws or plates
2, the creation of pilot holes: in order to ensure that the metal screws and holes are perfectly aligned, you can first create a pilot hole. The diameter of the pilot hole should be slightly smaller than the diameter of the screw, so that the screw can be guided accurately into the
3、Drilling stage: Self-drilling screws come with a drill tail tip, which is capable of drilling the center hole by itself. At the beginning of drilling, the screw will penetrate into the material, continue drilling until it penetrates the material, and then continue drilling to ensure that the threads are firmly embedded
4. Tighten the screw: Screw the screw into the drilled hole until it is fully embedded and the shoulder is in contact with the plate. Use a wrench to tighten the nut on the screw so that the large end underneath the screw lifts the metal sleeve away from the hole so that it rises up to fill the hole
Small Parts 0607RTF Steel Thread Rolling Screw for Metal, Zinc Plated, 82 Degree Flat Head, Star Drive, #6-32 Thread Size, 7/16" Length (Pack of 100)
KWD 3.500
18-8 Stainless Steel Hex Nut, Plain Finish, ASME B18.2.2, 1"-8 Thread Size, 1-1/2" Width Across Flats, 55/64" Thick (Pack of 5)
KWD 7.500
2917 3/8 x 1-1/2-Inch Stainless Steel Fender Washer, 10-Pack
KWD 5
Hillman 47712 7 x 1/2-Inch Brown Gutter and Stovepipe Assembly/Repair Screw
KWD 9.500
