What is Matte PLA Material?
· Based on regular PLA, Matte PLA has a matte surface effect with no obvious layer lines.It's not easy to break or crack. The support structure is easy to peel off and the printed surface is not scratched.
· With upgraded paper reel, eSUN Matte PLA has better adhesion and printibility which improves the problem of bottom adhesion on the plate.
Specification of Upgraded PLA Filament:
Diameter: 1.75mm
Printing Temperature: 190-230℃ (Recommended Temperature 215℃)
6 Available Color Combinations: Deep Black + Milky White, Deep Black + Dark Grey, Milky White + Dark Grey, Deep Black x 2, Milky White x 2, Dark Grey x 2.
Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI

How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.

Please Notice:
The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.