3-80% Digital Hay Bales Moisture Meter Tester for Straw Bundles,Wood Sawdust Powder,Cereal Straw,Bran,Forage Grass,Leymus Chinensis,Emperor Bamboo Grass,Fibre,Soybean Meal,Leaves,Silage,Corncob (Blue)
【Measurement object】This moisture meter is widely used for measuring the moisture content of various substances, such as hay,forage grass, cereal Straw,straw bundles,bran, soybean meal,leaves,corncob,silage, fiber,wood sawdust powder,etc
【Wide measurement range】The moisture tester has a wide testing range of 3-80%.
【 Stainless steel probe】The moisture meter adopts a stainless steel probe, which is easy to insert into the measured object and durable.
【Backlight】The tester has a backlight display and can be used normally in dark places.
【Product Size】The probe length of the tester is 37cm, and the total length of the tester is 57cm.
【On/Off key】Unscrew the battery cover, install 4 AA batteries correctly, and press the power button to turn it on.After turning on, the screen displays P1.
【Wet Day1/Normal 2】Usually set to “2”,it indicates low humidity environment.only when the air humidity is greater than 65%,choose“1”,it indicates high humidity environment.
【CAL button】usually set to “0”.The tester can adjust the moisture value range from -9 to 20. (1)Set according to temperature compensation: +10℃to+35℃,set to 0; - 5℃to+10℃, set to 1; -10℃to-5℃,set to 2; - 15℃to-10℃, set to 3; -30℃to-15℃, set to 8. (2) Correct the moisture value according to personal needs.
【Key points of operation】To reduce errors and achieve the best measurement results,please follow the following methods: 1. The two probes of the instrument should be vertically and quickly inserted into the tested object. 2. After inserting, release your hand and wait for the tester to read about a few seconds. 3.When testing the same substance multiple times, use the same technique to measure it.
【Reminder】: 1. If the instrument is not in use for a long time, please remove the batteries to prevent battery leakage and corrosion of the circuit board. 2. The tester should not be used for children to play or for joking or stabbing people, otherwise safety accidents may occur and take responsibility on your own. 3.Before using the tester, please remove the probe protective cover. After use, please put on the probe protective cover to prevent the probe from piercing other objects 4. The probe cannot come into contact with 220V AC power.