Search

Search

Upgrade TZ2.0 Hotend for Bambu Lab P1P/P1S/X1/X1C/X1E Hot end Assembly with 0.4mm Hardened Steel Nozzles, Upgraded Plated Copper Nickel Heater Block and Throat Tube

KWD 7
Brand
LANKEGU
Weight
50 g
– 1 +

Special Features

  • Compatible Models: The upgraded hot end assembly for Bambu Lab X1/X1C/X1E/P1P/P1S 3D printer.
  • Less Prone To Bending And Breaking: The heating block is connected to the radiator through two titanium alloy screws to prevent the throat from bending and breaking during high-speed printing.
  • Upgraded Hot End: The heating block upgraded to chromium-zirconium copper nickel plating treatment, high-temperature resistance degree printing, and fast heat conduction.(Support various high-temp filaments up to 320℃ and the flow rate can reach 35mm³/s).
  • Removable 0.4 Hardened Steel Nozzle: The upgrade nozzle is connected by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of leakage.
  • Smooth Inner Surface: The inner wall roughness of the throat tube and the inner wall of the nozzle is Ra 0.4, which reduces clogging and improves printing quality.

Description

TZ 2.0 upgraded hot end kit
Flow rate: 35mm³/s
High-temp filaments up to 320℃
Removable 0.4 hardened steel nozzle
Upgraded Plated Copper Nickel Heater Block and Throat Tube
The upgrade hotend kit is for Bambu Lab X1/P1 Series ( P1P, P1S,X1, X1C, X1E )
Packaging: 1 hotend kit (NO thermistor and ceramic heater)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}