Search

Search

KWD 0
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • 【High Quality Material】The forstner bit extender is made from solid, heavy duty machined steel. The collet inside diameter is 3/8 inch. This is designed to accept forstner bits with shank sizes of 3/8inch or slightly smaller. Please measure your bit shank before purchase.
  • 【Non-slip Design】Adopting 9.5mm (3/8in) hexagonal shank design, it has larger contact area and more stable structure. This non-slip hex shank can effectively prevent loosening or dislodging when rotating at high speeds, and ensure that the extension rod is tightly connected to the drill rig or electric drill, enhancing the safety and efficiency of the operation.
  • 【Convenient To Use】The use process is simple and quick, without complicated steps. First, use the hexagonal key included in the package to loosen the set screws, then insert the drill rod (not included) into the extension bar, making sure that the two set screws are parallel to the flat surface of the drill rod, and finally tighten the two set screws.
  • 【Simple & Efficient】 When we need to drill deeper holes in certain woods,normal forstner bits are often not long enough; So we offer one extension for drilling depths of 8.66" deeper,which require only simple installation for deeper holes.
  • 【Increase Drilling Depth】The forstner bit extension gives you additional 8-3/4 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}