Product Information:
Color: Black
Size: 0.9×0.9×0.9 inches
Material: Plastic&Copper
Quantity: 1 Pc
Voltage: 12V
Power: 2W
Vehicle Service Type: ‎Universal Fit
How to install?
-Choose a suitable position, fix the camera and make sure the view angle is clear.
-Connect the power supply on the right side on the center console or on the rear trunk, and then straighten the connecting wire gradually forward until it reaches the bottom of the dashboard and the shifter.
-The camera usually has two wires, one for grounding and the other connects to the running rear light wire to get power.
-The remaining wire processing part of the roof is usually located at the interior light cover, which needs to be removed, and then the camera wire will be passed through it.
-You need to lay out and fix the camera wires, try to avoid too many residual wires to avoid mistakes.
-Test: After finish the wiring, start the vehicle and open the reverse gear to test whether the camera works normally and the view is clear.
Warm note:
-If you are not sure if your car is suitable for our products, please contact us and we will have someone to answer your questions.
-After purchasing the product, if you have any questions, you can contact us via email within 24 hours, and we are happy to solve the problems you encounter.
-Your satisfaction is our service goal.