Search

Search

Voron2.4 Blobifier Servo Blob Purge Bucket Kit: FYSETC Upgrade Nozzle Filament Buildup Collector No Printed Parts with Silicone Brush Cleaning Tool for Extrusion Residual on Voron2.4 350 Extruder

KWD 9.500
Brand
FYSETC
Weight
59 g
– 1 +

Special Features

  • 1. A Must-Have for Voron2.4 Series: Our Blobifier Kit is an Upgraded Version based on the Offical. In the configuration provided, we add the steering gear control, the leveling and ERCF multi-color codes are commented out. Besides, the extrusion and cutting actions are optimized according to the Settings and structure of Voron2.4-300 model. You can run the blobifier command directly through Marco. If the command is not reset before execution, the system will remind
  • 2. Upgraded Silicone Brush Wiper: Clean your nozzle before resuming to print. Different from brass brush, our kit comes with a flexible & soft silicone cleaner, which can effectively removes filament buildup from the nozzle, reducing the possibility of print defects and ensuring a high quality print output. And they are not noisy or hard on the nozzle like some other cleaning tool replacements. About the nozzle mounting bracket, please search on Thingivers: VORN Nozzle Silicone Brush Mount
  • 3. Features: The Blobifier is a small device that eliminates the need for a purgeblock, making filament swaps more quick. It does this by extruding filament onto a tray creating a blob that will get ejected into a purge-bucket for VoronV2.4 300mm, 250mm and even 350 Build. It helps 1) turn your filament purge waste into blobs for fewer waste and quicker purging. 2) Store the blobs in a bucket that can hold 400 blobs! (for the V2 300mm) 3) Automatically pause the printer once the bucket is full
  • 4. Where to Install?: This version only supports the assembly on the rear-left of the bed. Our package only includes the necessary accessories, such as SG90 or MG90 servo, heat set inserts, aluminum strip, PCB board with omrn D2F-5L sized micro switch and screws, nuts. Not come with the printable mount bracket, please go and find on Thingivers: Vorn Blobifier Blob Purge Bucket Mount. And print them with high-temp consumables, ABS, PA-CF, etc, not the low-temp PLA, PETG, TPU, Wood
  • 5. NOTE: If servo return in neutral position when not ussed after "in" command, this is not a damaged servo! Please try set the variable_dwell_time in gcode_macro BLOBIFIER_SERVO to 0!!! Empty the bucket if you remove it! The system will reset the blob counter. Shake the bucket for better dispersion of the blobs in the bucket. The number of execution times will be displayed in the console, with a counting function
  • 6. Operation method: Modify the macro to set. Wiring depends on the motherboard, then the pin definition is different. Our configurations is for Spider3.0 Mainboard, and the two pins used are PA2 PA1

Description

FYSETC Upgraded Voron2.4 3D Printer Accessories, Blobifier Servo Blob Purge Bucket Kit, NO printed parts, you need to print it by yourself via Thingivers. Our Kit improves the nozzle silicone brush for better removal effect and nozzle surface profection, also add the servo control command. It's an improvement based on the official.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}