CR-6 SE All Metal Hotend Upgrade Kit for CR6 SE,CR-6 SE MAX 3D Printer Hotend Replacement,Bi-Metal Heatbreak,Heater Block Aluminum,MK8 Brass Nozzle 0.4mm.
1: This is an all metal hotend for CR-6 SE 3d printer replacement or upgrade. It can be installed without any modification to the printer, and the heat sink and heatbreak have a tapered design. This design allows for more adequate heat dissipation at the hot end. Statement: This all metal hotend does not include the heater cartridge and thermistor and you need to assemble it yourself, please understand before ordering.
2: Bi-Metal Heatbreak: Titanium alloy reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction, contributes to great heat insulation. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
3: Titanium alloy support screws with high strength and very low thermal conductivity make the whole structure more robust. With the heat sink firmly in place, nozzles can be changed with one hand and you don't have to worry about the print head falling off during printing.
4: Advanced manufacturing processes enable this nozzle to have higher surface values, High precision, Sleek Inner Wall, Smooth filament feed-out, No burrs, Lower viscosity, Smooth filament-pushing. Brass nozzle high cost performance, Suitable for printing PLA, ABS, ASA, TPU, PA and other conventional materials.
5: The all metal hotend is equipped with bi-metal heatbreak and titanium alloy screws, providing excellent thermal insulation performance. It minimizes heat loss to the MAXimum extent, enhancing printing efficiency,making the hotend more stable and reliable, eliminating heat creep, improving resolution,stop clogging and prevent failed prints.
Description
After sales guarantee: each defective item can be replacement for free or refund.
If any question, please feel free to contact us, Newwish is committed to providing you with the best service!
Compatible with CR-6 SE/CR-6 SE MAX 3D Printer.
Packing List:
Heatsink Aluminum X 1
Bi-Metal Heatbreak X 1
Heater Block Aluminum X 1
MK8 Brass Nozzle 0.4mm X 1
Titanium Alloy Screws X 2
Connector X 1
Bowden Collets X 2
Gift：Silicone Sock X 1
Note：When the printing temperature is to exceed 280℃, you need to remove the silicone sock in advance.
Ender 3 S1 Nozzle 0.4mm,MK Brass Nozzles for Sprite Extruder Pro Ender 3 S1/Pro/Plus Nozzle 0.4mm for Ender 3 Neo/V2 Neo/CR-6 SE/Max Ender 3 V2/Pro/Max/Ender 5/CR-10 3D Printer Hotend.(5Pcs)
KWD 7
Ender 3 V3 SE Nozzle 0.6mm,Ender 5 S1 High-Speed Hotend Extruder 500℃ High Temperature Plated Copper Nozzles 0.6mm for Ender 3 V3 SE,Ender 5 S1,Ender 7 3D Printer.(2Pcs)
KWD 7
-18%
15PCS Hardened Nozzles Kit for Anycubic Kobra, 3D Printer 7PCS 0.4mm Nozzles and 2PCS 0.2mm, 0.6mm, 0.8mm, 1.0mm Wear Resistance Nozzles Kit for Anycubic Mega, Mega X, Chrion, Kobra Neo
KWD 7
Ender 3 Belt Tensioner Upgrade Kit,Ender 3 2020 X-axis + 4020 Y-axis Belt Tensioner for Ender 3 3D Printer.(X2020+Y4020)
KWD 5
