Introduction to wireless charging transmitter
Wireless charging transmitter module, compatible with WPC standard wireless receiver.
The maximum support is 5W charging power.
Supports Foreign Object Detection (FOD) function.

Low quiescent power consumption, high efficiency.

Dual LED indicators indicate the status of the module at power-up, charging, charging saturation, foreign object detection (FOD), etc.

Product Parameters

Input power: Input: 5V/2A, Output: 1A Charging power: 5W (Max)
TRANSMISSION DISTANCE: 0-8MM

Executive standard: QI wireless charging standard

Limit Parameters

Rated operating voltage: +5V DC

■Working temperature: -20 °C~+85C

■Storage temperature: -40 °C~+125 °C

Note: The limit operating voltage of this product cannot exceed 5.5V DC

Operating Instructions

1. After the power is turned on, the standby red LED on the module lights up.
2. Charge the mobile phone with wireless charging function, the coil center of the corresponding module in the back center of the coil is placed on the coil to charge the mobile phone (note: the position offset of the mobile phone placed in the modulecoil will affect the charging effect), and the blue LED on the module will light up during the charging process.

3. The wireless charging module has the function of foreign object detection, when there is a metal foreign object on the transmitting coil of the module, the blue LED flashes, after the metal foreign object is removed, the blue LED goes out, and the red LED lights up.