5. High-quality CBB capacitors, withstand DC withstand voltage of 630V 6. Potentiometers are all equipped with nuts and can be used without adding any components Product parameters Using voltage: AC 220v Maximum power: 2000W Voltage regulation: AC 50-220V The thyristor withstands up to 1200V/current 5A 1.6mm thickened epoxy copper clad board This voltage regulator has a peak voltage absorption circuit to effectively protect high-power thyristors isheng Electronics Co..Ltd Longer service life Shenzhen Jiaqisheng- Specifications: 60MM+48MM*28MM Weight: 43g 32 Connect this product to the circuit of a table lamp or electrical appliance (that is, disconnect any one of the live wire or neutral wire of the table lamp or electrical appliance, and connect the two wires of this product). Rotate the potentiometer rod to adjust the brightness, speed, voltage and temperature. It is very convenient to use. This product is suitable for: using new bidirectional high-power thyristors, because the current can reach 25 amps, which solves the overcurrent problem caused by the small resistance of the electric furnace wire when it is cooled; it can easily adjust the output voltage of the mains, and adjust it arbitrarily between 90-220 volts for electrical appliances. Such as: heating adjustment of electric furnaces and water heaters, dimming of lamps, speed regulation of small motors, temperature adjustment of electric soldering irons, etc., so as to achieve the effects of dimming, temperature adjustment and voltage adjustment. It can be used for large electrical appliances with a power consumption of less than 2000 watts. Since the power is already very large, it is sufficient for general household appliances or small industrial appliances. (The power of inductive or capacitive loads should be low. This voltage regulator is equipped with bidirectional high-power thyristors, and the potentiometers are all equipped with nuts. It can be used without adding any components, which is very con